3 point bale feeder free download.Straw Blower & Bale Feeder

  3 point bale feeder free download.Bale Feeders                                                                         Enquire About This Product.3-Point Bale Mover | Bale Hugger | DewEze […]

 

3 point bale feeder free download.Bale Feeders

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Enquire About This Product.3-Point Bale Mover | Bale Hugger | DewEze

 

May 11,  · 3 point linkage bale feeder Location: Bannockburn, South West, VIC 3 point linkage round bale feeder, engineered and built by Knuckeys in Winchelsea Originally built for feeding straw within narrow vineyards. Only used for half a season as the machine is too wide for our m vine rows. The machine has been stored in a shed for the last 4 years and is in perfect operating on: Bannockburn, South West, VIC. BIG EASY 3 point link Bale Feeder Details. This Bale feeder is able to load itself without any complicated actions and can easily transport two bales at once. The 3 point linkage Aitchison® Agrispred® Bale feeder is a smart choice that will provide many years of trouble free use on your farm. hot dip galvanised, or painted finish. Large table. 3) Unfinished bales inside ring feeders due to poor ground conditions, not allowing animals to reach the leftover bale. 4) Stock rejecting feed because of dirt, mud or other contaminants. Savings can be made by feeding the right amount of the bale and retaining the rest for the next feed.

 

3 point bale feeder free download.Bale Unrollers & Feeding Machines | Hustler Equipment USA

3) Unfinished bales inside ring feeders due to poor ground conditions, not allowing animals to reach the leftover bale. 4) Stock rejecting feed because of dirt, mud or other contaminants. Savings can be made by feeding the right amount of the bale and retaining the rest for the next feed. BIG EASY 3 point link Bale Feeder Details. This Bale feeder is able to load itself without any complicated actions and can easily transport two bales at once. The 3 point linkage Aitchison® Agrispred® Bale feeder is a smart choice that will provide many years of trouble free use on your farm. hot dip galvanised, or painted finish. Large table. May 11,  · 3 point linkage bale feeder Location: Bannockburn, South West, VIC 3 point linkage round bale feeder, engineered and built by Knuckeys in Winchelsea Originally built for feeding straw within narrow vineyards. Only used for half a season as the machine is too wide for our m vine rows. The machine has been stored in a shed for the last 4 years and is in perfect operating on: Bannockburn, South West, VIC.
 
 
related:
BIG EASY 3 point link Bale Feeder
C430-3-Point Linkage Silage Feeder and Straw Blower Videos
3 point linkage bale feeder | Farm Tender
3 point linkage bale feeder
C430-3-Point Linkage Silage Feeder and Straw Blower
BIG EASY 3 point link Bale Feeder – Aitchison

The McHale C is the flagship model in the range which is a trailed machine that has the capacity for three 5ft diameter bales. McHale have expanded this range by adding two models to include the McHale C linkage machine to cater for users who have restricted access to confined space and the McHale C to provide a machine with extra capacity.

A key feature on the C4 range is its twin speed independent gearbox, which allows the operator to easily adjust from rpm for feeding silage or hay up to rpm for using the machine to distribute straw for bedding. Feeding : The McHale C4 range of machines are ideal machines for feeding silage and hay, the twin speed gearbox allows silage and hay to be distributed exactly where it is desired.

The speed of the conveyor is proportionally controlled allowing the operator to adjust feeding speed depending on the material density and composition. Bedding : The McHale C4 range of machines can be used to distribute bedding material quickly and efficiently leaving a thick aerated bed of straw. In difficult to access bedding areas, the chute on the McHale C4 range can pass through degrees for ease of bedding.

Straw can be blown up to 18m. The McHale C is a 3 — point linkage machine designed for farmers who have to work within confined spaces for feeding and bedding. The McHale C is a trailed machine with the capacity to carry and blow or feed out two 4ft diameter round bales of hay, straw, silage or haylage.

The McHale C is a trailed machine with a higher capacity to carry and blow or feed out two 5ft diameter round bales of hay, straw, silage or haylage. The McHale C is a trailed machine with approximately a 6. There are two speeds at which to choose from depending on the task at hand; rpm and rpm. The 1. The flywheel housing is positioned below the conveyor, this design ensures that any loose material which falls into the flywheel housing is blown out. The flywheel rotates below the conveyor which improves the delivery of full length fodder for feeding or bedding and ensures that no fodder remains in the machine after use.

The feed rotor is equipped with 56 blades mounted on seven discs. The feed rotor is independent of the flywheel, this allows the operator to bring the flywheel up to full speed before starting the feed rotor. The feed rotor can be engaged and disengaged from the tractor cab. This reduces the amount of power required to start and run the machine and reduces the risk of blockages. The blades are mounted at an angle on the seven discs and pass through a fixed comb to ensure the material is cut and fed into the flywheel evenly.

This design minimises crop build up on the rotor. Speed can be adjusted and the conveyor can be reversed from the tractor cab. Heavy duty, wear resistant rollers and nylon strips reduce wear to a minimum. The conveyor formation has been designed to ensure consistent and even feed to the rotor. This three-stage design minimises resistance and allows for maximum blow distances to be achieved, especially when blowing straw in confined spaces. The 3 stage chute is designed to move through an arc which means crop can pass through the chute easily and the chute does not reduce blow distances.

The chute is joystick controlled, allowing the operator to adjust the chute height and the shoot direction easily from the control console in the tractor cab. The chute may also be lowered to blow material on to the feeding slide for better control when distributing feed along a barrier. The High Torque Belt Drive, which drives the feed rotor, can be hydraulically engaged or disengaged.

This system ensures that the flywheel straw blowing turbine can be worked independently of the rotor. This allows the flywheel to be at full RPM before any fodder material is fed into the rotor.

As the floor conveyor works independently from the rotor, this ensures that fodder can be reversed away from the rotor without disengaging the rotor. The McHale C4 Silage Feeding and Straw Blowing Range is controlled via an electronic control console allowing the operator to control machine operation from the tractor cab. This user friendly control console provides the operator with access to all the functions of the machine without ever having to leave the comfort of the tractor seat.

An external loading control comes fitted as standard which will allow for the conveyor floor and the tailgate to be operated when removing the netting or wrap whilst loading a bale. The tailgate and conveyor alignment on the machine body take the largest size square bales without the need for extensions to the tailgate.

The tailgate on the machine can be used to load a bale without the need for a second tractor. The cupped tailgate design ensures a bale is held in the dip in the tailgate, while the twine or net is being removed. The ram mounting points on the tailgate ensure that maximum lifting power can be achieved so that the heaviest of bales can be handled.

To prevent accidental operation of the controls, a safety button on the side of the External Loading Control must be pressed while operating loading functions at the rear of the machine. Their contracting business started in and offers a wide range of services which include baling, hedgecutting, muck spreading and gritting.

They also farm acres where they keep a herd of suckler cows. Select a Language. Twin Speed Gearbox A key feature on the C4 range is its twin speed independent gearbox, which allows the operator to easily adjust from rpm for feeding silage or hay up to rpm for using the machine to distribute straw for bedding.

The short and compact body on the McHale C makes it ideal for manoeuvering in narrow passages, especially in buildings with one door. The C has the capacity to carry and feed two 4ft diameter round bales of hay or straw or one round bale of silage or haylage. C — Trailed Silage Feeder and Straw Blower The McHale C is a trailed machine with the capacity to carry and blow or feed out two 4ft diameter round bales of hay, straw, silage or haylage.

The McHale C is the ideal machine for the farmer who wishes to bed their sheds with straw and feed out bales of hay, haylage or silage. Like all machines in the McHale C4 range, the McHale C is also capable of bedding and feeding out large square bales or clamp silage. C — Trailed Silage Feeder and Straw Blower The McHale C is a trailed machine with a higher capacity to carry and blow or feed out two 5ft diameter round bales of hay, straw, silage or haylage.

The extra capacity of the McHale C allows farmers to increase their output when bedding or feeding, especially if they may be using the machine on another farm which is some distance away from the main farm. The McHale C is available with an optional linkage drawbar which allows the machine greater access to tight sheds with narrow entrances.

Twin Speed Gearbox. Read More. Flywheel Straw Blowing Turbine. Rotor with Hydraulic Activation. Floor Conveyor. Joystick Controlled The chute is joystick controlled, allowing the operator to adjust the chute height and the shoot direction easily from the control console in the tractor cab. Rotor with High Torque Belt Drive. This gives a number of advantages, namely: The flywheel straw blowing turbine can be at full rpm before the rotor starts to feed.

Horsepower requirements are reduced. It ensures that the machine is less likely to block on start up. Machine design keeps horsepower requirements to a minimum. Independent Floor Conveyor As the floor conveyor works independently from the rotor, this ensures that fodder can be reversed away from the rotor without disengaging the rotor.

Electronic Controls. Bale Loading The tailgate on the machine can be used to load a bale without the need for a second tractor. Safety First To prevent accidental operation of the controls, a safety button on the side of the External Loading Control must be pressed while operating loading functions at the rear of the machine.

Bale Chamber. Conveyor Drive Hydraulic No. Discharge Distance 18 metres. Do you have a review for this product? Add a review and get a free gift! Add a Review. Dec 7th, Search Dealers Locate Dealers from:. Select a Region. Product News. Jul 07, This site uses cookies to improve your experience. Learn more.

Ok, thanks.